Design your build-to-suit data center

Build-to-Suit Data Center Solutions

A build-to-suit data center lets you decide the location, size, power density and level of resiliency. We handle design, construction and daily operation. Then we lease the finished space back to you, so the capital stays in your business, not in a building.

How Do Build-to-Suit Data Centers Work?

A Build-to-Suit Data Center Built For One Tenant, Operated By People Who Build Data Centers

A build to suit data center sits between standard colocation and building your own. The provider designs the space from the ground up around your requirements. It then owns and runs the facility, and you sign a long term lease for the finished result.

01

Keep Capital In The Business

You lease the finished facility instead of funding land, construction and equipment. Spend shifts from a large upfront capital project to a predictable operating cost.

02

Control Without Construction Risk

You set the spec, so we take on the contractors, permits, schedules and long lead equipment orders that make ground up projects risky.

03

Resiliency You Choose

Pick the redundancy level, cooling approach and power density per rack, rather than accepting what a shared hall offers.

04

A Location That Fits Your Plan

Build around business continuity, network access and power, with Volico sites in Miami, Pompano Beach, Atlanta and Chicago.

What You Can Customize

Every Layer Of The Facility Is Up For Discussion

Standard colocation starts from a finished room. A build to suit project starts from your requirements document. Your team makes the decisions below at the table, before crews pour concrete or run any wire.

Build to Suit Data Centers

Structure And Floor Loading

We rate floor loads for dense, heavy racks. We build roof and wall systems for local hazards, including Category 5 hurricane winds in South Florida.

Power And Electrical

Your redundancy level, circuit design and kW per rack, fed by 2N+X UPS and generator systems.

Cooling

Cooling is co-designed with your engineers, so containment and airflow fit the heat load you expect to run.

Security And Access

We lay out dedicated entrances, loading and staging areas, access rules and camera coverage so that security fits how your team works.

Connectivity

Carrier entry paths and cross connects planned in, so you bring the networks you already use.

Compliance Controls

Access logging and physical controls fit your audits, since the facilities already hold SOC 2 Type II.

Compare Delivery Models

From Rack Ready To Fully Custom. Accelerate growth with tailored data center solutions

Each step up the ladder buys more control and costs more lead time. Many customers start in colocation and move up when their footprint grows.

Rack Ready

Retail Colocation

Cabinets and cages in a shared, finished data hall.

Go live

Days to weeks

Upfront cost

Lowest

Design control

Standard layout

Whitespace

Wholesale Colocation

A dedicated suite or hall inside a facility that is already running.

Go live

Weeks to months

Upfront cost

Low

Design control

Within the suite

Fully Custom

Build To Suit

Space designed and built from the ground up to your spec, then operated for you.

Go live

Often 18 to 30+ months

Upfront cost

Low, you lease it

Design control

Full

One Partner, Every Workstream

What Volico Handles On A Build To Suit Project

A custom build pulls in real estate, finance, utilities, engineering and operations. You get one accountable team across all six instead of a stack of separate contracts.

Site And Real Estate

We match your continuity, network and power needs to the right Volico market: Miami, Pompano Beach, Atlanta or Chicago.

Financial Structure

We work out lease term, expansion rights and a clear capex versus opex picture before design locks.

Power Procurement

We coordinate with the utility and order transformers, switchgear and generators early, because those items usually set the schedule.

Design And Construction

One team handles engineering, permitting and construction management, while your engineers sign off at each gate.

Efficiency By Design

Efficient electrical and mechanical design brings down PUE, so your long term operating cost drops too.

Operations For The Long Run

Volico engineers provide 24/7 monitoring, smart hands and remote hands when your equipment goes live.

How A Build Comes Together

Six Phases, One Accountable Team

Industry reports put new build to suit projects at 18 to 30 months or more. The electrical supply chain drives much of that, since transformer lead times have stretched past two years in many markets.

We plan the schedule around those lead times from the first meeting. We also tell you early where the risk sits.

Need Space Before Your Build Is Ready?

Start in standard Volico colocation, then move into your dedicated space after commissioning, with the same engineers and network.

1

Market And Requirements Analysis

We document power, density, growth, compliance and network needs, then test them against each Volico market.

2

Site Selection

We pick the facility and space that fits your continuity plan and carrier needs, and confirm available utility capacity.

3

Design And Engineering

We draw layouts, electrical one-lines, cooling and security designs. Your team reviews and signs off on each before construction starts.

4

Permits And Power Procurement

We file permits and order long lead electrical equipment as soon as the design allows.

5

Construction And Commissioning

Construction management through completion, then full load testing of power and cooling before handover.

6

Move In And Operations

Migration support on day one, then 24/7 monitoring and smart hands for the life of the lease.

Choosing A Partner

Eight Questions To Ask Any Build To Suit Provider

A build to suit lease usually runs ten years or longer. Put these questions to every provider on your shortlist, including us.

Can they finance the build?

Ask how the provider funds the project and what happens if costs move during construction.

Do they design data centers in house?

General contractors build buildings, but you want engineers who design for power, cooling and uptime every day.

Who covers space, power, cooling and network?

Each discipline needs a specialist on the project, so one generalist is not juggling all four.

Will the same company operate it?

A partner that builds and then runs the facility has a reason to get the design right.

How is physical security handled?

Look for layered access control, cameras and audited procedures, rather than just a badge reader.

How do they control speed and cost?

Ask about equipment ordering, standard designs they can adapt and how they price change orders.

Which certifications do they hold?

Volico facilities hold a SOC 2 Type II audit and support HIPAA and PCI DSS environments.

What changes are possible later?

Settle expansion rights, renewal terms and exit options before you sign anything.

Where It Fits

When A Custom Build Beats Shared Space

Build to suit takes longer than colocation. It pays off when standard space would force a compromise on density, security or long term size.

Build to Suit Data Centers

AI And High Density

GPU and HPC racks that need power and cooling far beyond a typical enterprise cabinet.

Build to Suit Data Centers

Expansion Or Relocation

Moving out of a facility you have outgrown, or adding a second site in a new market.

Build to Suit Data Centers

Exiting An Owned Facility

Handing off an aging building you own, along with the capital and upkeep tied to it.

Build to Suit Data Centers

Mergers And Acquisitions

Consolidating server rooms and data centers after a deal changes where your ideal location is.

FAQ

Build To Suit Data Center Questions

Answers to what buyers ask most before scoping a custom build. Have one we did not cover?

Data center space designed and built from the ground up for one customer. The provider owns and operates the facility. The customer leases the finished space on a long term agreement, so there is no large construction bill upfront.

A powered shell gives you the building, utility power and fiber. You install the UPS, generators, cooling and interior yourself. Build to suit delivers a finished, operating space, and the provider runs the critical systems.

When you need capacity within weeks, or your footprint fits in cabinets, cages or a single suite. Both run inside a facility that is already live, so they are the fastest options.

The terms overlap. Some providers use build to order for custom capacity inside an existing campus. They use build to suit for a new building. Either way, we shape the capacity to your requirements.

Industry figures put new builds at roughly 18 to 30 months or more. Power availability and electrical equipment lead times usually decide the final schedule, so we plan around them from the first meeting.

The provider typically owns the building and infrastructure, and you sign a long term lease, often a triple net lease. You and the provider set term, renewals and expansion rights before construction starts.

Yes. You can start in standard Volico colocation, then move into your dedicated space after commissioning.

Volico built FLL1 to withstand a Category 5 hurricane. Power and cooling run on 2N+X redundancy with on-site generators. You can also pair a Florida build with a recovery site in Atlanta or Chicago.

Start Your Build

Send Us Your Spec. We Will Come Back With A Plan.

Share your power, space, density and compliance requirements. Then a Volico engineer will walk you through site options, a design approach and a realistic timeline.

  • This field is for validation purposes and should be left unchanged.
  • This field is hidden when viewing the form

About cookies on Volico.com

Volico Data Centers use cookies to collect and analyse information on site performance and usage. This site uses essential cookies which are required for functionality.  More detail is available in our privacy policy. Learn more